> ## Content Index
> Fetch the complete content index at: https://soundforgepro.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# What Is True Peak? dBTP, Sample Peak and Codec Headroom
- URL: https://soundforgepro.com/true-peak-explained/
- Published: 2026-08-26T06:12:46.000Z
- Updated: 2026-09-04T21:34:55.000Z
- Description: Understand dBTP, inter-sample peaks and codec headroom, then verify the encoded file instead of trusting the source meter alone.
- Author: Erick Finn
- Tags: Mastering

**True peak is an estimate of the highest level reached by the continuous waveform represented by digital audio.** It is reported in dBTP. A sample-peak meter stops at the largest stored sample; a true-peak meter reconstructs points between those samples and looks for a higher crest.

That distinction explains an otherwise strange result: a WAV can show a sample peak of −0.1 dBFS and still measure +0.7 dBTP. The file doesn’t contain an illegal “+0.7” sample; the overshoot appears in the reconstructed curve. Sample-rate conversion and lossy encoding can change that curve again.

**Practical answer:** use Integrated LUFS to judge programme loudness and true peak to protect the top of the signal. Follow a written delivery ceiling when one exists. Without one, −1 dBTP is a common starting point for lossy delivery, not a law that every platform enforces. Measure the actual encoded deliverable before sending it.

## True peak, sample peak and LUFS at a glance

Swipe horizontally to compare every column →

| Measurement         | What it reads                                       | Unit                            | What it answers                                                     |
| ------------------- | --------------------------------------------------- | ------------------------------- | ------------------------------------------------------------------- |
| Sample peak         | Highest stored PCM sample                           | dBFS                            | Did any stored sample reach digital full scale?                     |
| True peak           | Estimated maximum of the reconstructed waveform     | dBTP                            | Could the represented signal crest higher between samples?          |
| Integrated loudness | Gated programme loudness over the measured duration | LUFS                            | How loud is the whole programme by the chosen measurement standard? |
| Limiter ceiling     | A processing control, not a measurement result      | dBFS or dBTP, depending on mode | What maximum should the limiter try to hold?                        |

The units are related to full scale, but they do different jobs. A low true peak doesn’t make dialogue consistently loud, and a correct LUFS result won’t guarantee safe peaks. A limiter set to −1.0 on a sample scale isn’t automatically the same as −1.0 dBTP either.

![Sample peak at minus 0.1 dBFS compared with a reconstructed waveform crest at plus 0.7 dBTP](https://storage.ghost.io/c/af/4b/af4b05d4-2e0b-4edc-8378-1e2a62fecc70/content/images/2026/08/sample-peak-vs-true-peak.webp)

The stored samples stay below full scale while the reconstructed curve rises above it between sample instants.

## Why the highest sample can miss the highest crest

PCM audio stores a sequence of sample values taken at discrete moments. Playback doesn’t turn those values into a staircase: a reconstruction filter produces a continuous signal that passes through the samples while excluding frequencies the sampling system cannot represent.

Near a fast transient, the smooth reconstructed curve can rise higher than either neighboring sample. That between-sample maximum is commonly called an inter-sample peak. The sample-peak result remains correct about the data it inspected; it simply answered a narrower question.

[ITU-R BS.1770-5](https://www.itu.int/dms%5Fpubrec/itu-r/rec/bs/R-REC-BS.1770-5-202311-I%21%21PDF-E.pdf) notes that sample-peak under-reading can commonly reach several decibels for transients with significant high-frequency content. It also explains why the problem is generally less severe at higher original sampling rates. Neither statement means every dense master has a huge hidden overshoot. The waveform, sample phase and bandwidth determine the difference.

A positive dBTP reading therefore describes a measurement estimate above the digital full-scale reference. It doesn’t prove that every converter, phone or streaming path clipped audibly, since downstream headroom and implementation vary. It does tell you the file is close enough to the boundary that reconstruction or later processing deserves attention.

## How a true-peak meter makes the estimate

The current [BS.1770-5 recommendation](https://www.itu.int/rec/R-REC-BS.1770-5-202311-I/en) specifies a true-peak measurement method built around oversampling. The meter inserts intermediate values, applies an interpolation filter and then searches the higher-rate signal for its maximum. It’s recreating a standards-defined view between the original samples, not recording the output of every possible physical converter.

Oversampling accuracy matters. The ITU document shows that increasing the oversampling ratio reduces the possible under-read. [EBU Tech 3343-2023](https://tech.ebu.ch/docs/tech/tech3343.pdf) describes about 0.5 dB of possible under-read for a 4× true-peak meter at a 48 kHz base rate and uses that context when explaining its production headroom.

This is why two meters can disagree slightly without either being a sample-peak meter. They may use different oversampling ratios, filters, channel handling or update behavior. For contractual work, use the meter and mode named by the specification. For ordinary preflight, the useful question is whether the reading leaves comfortable room rather than whether two displays match to the last tenth.

## Reconstruction is only the first place peaks can change

A source WAV is not always the file a listener receives. Sample-rate conversion changes the represented samples. AAC, MP3 and other lossy codecs discard and rebuild information according to their own models. Decode filters then create another sample sequence. The loudest point after that path can differ from the source measurement.

![Four-stage path showing PCM samples, reconstructed true peak, lossy encoding and playback devices where peak shape can change](https://storage.ghost.io/c/af/4b/af4b05d4-2e0b-4edc-8378-1e2a62fecc70/content/images/2026/08/where-peaks-change-mobile.webp)

Source measurement is necessary, but the encoded deliverable is the file that must survive the real distribution path.

Apple’s [Digital Masters technology brief](https://www.apple.com/apple-music/apple-digital-masters/docs/apple-digital-masters.pdf) makes the operational point directly: levels that show no overs in PCM can still clip after encoding. Apple supplies tools for auditioning and checking the AAC result and recommends leaving at least 1 dB of headroom in its workflow.

That doesn’t mean every codec always adds one decibel. Content, bitrate, sample-rate conversion and encoder implementation all matter. What it means is that “the source meter was clean” isn’t the final QA result when the deliverable is compressed audio.

## What true-peak ceiling should you use?

Start with the destination rather than a number copied from a mastering chart.

| Situation                                              | Defensible decision                                   | Scope                                                                   |
| ------------------------------------------------------ | ----------------------------------------------------- | ----------------------------------------------------------------------- |
| Client or broadcaster supplies a ceiling               | Use that ceiling and its named meter/mode             | The written specification wins                                          |
| EBU generic linear PCM production                      | Maximum −1 dBTP                                       | EBU R 128 production context                                            |
| EBU MPEG-1 Layer II or Dolby AC-3 distribution example | Maximum −2 dBTP                                       | Specific data-reduction systems in Tech 3343                            |
| Spotify master around −14 LUFS                         | Keep below −1 dBTP                                    | Current Spotify mastering guidance                                      |
| Spotify master louder than −14 LUFS                    | Keep below −2 dBTP                                    | Spotify warns louder masters are more vulnerable to encoding distortion |
| No written spec, lossy delivery expected               | Use −1 dBTP as a starting point, encode and remeasure | House workflow, not a universal platform rule                           |

Spotify’s current [loudness-normalization guidance](https://support.spotify.com/us/artists/article/loudness-normalization/) is a useful example of scope: it advises below −1 dBTP around −14 LUFS and below −2 dBTP for louder masters. That is [Spotify’s published mastering advice](https://soundforgepro.com/streaming-loudness-standards/). It does not prove that Apple, YouTube and every distributor reject the same file at the same threshold.

## True-peak limiting is not the same as typing a lower ceiling

A conventional limiter can hold its output samples below a dBFS ceiling and still produce a higher reconstructed peak. In true-peak mode, a limiter uses an oversampled prediction in its detection path and controls gain against that estimate.

Three practical limits remain:

- **The mode must actually be enabled.** A plugin may show a true-peak meter while its limiter remains in sample-peak mode.
- **The source can change after the limiter.** EQ, gain, sample-rate conversion or encoding later in the chain can create a new maximum.
- **A ceiling is not a sound-quality target.** More limiting can reduce transients and raise distortion even when the final dBTP number looks safe.

If a clean master misses a delivery ceiling by a few tenths, lower the final gain or use a controlled true-peak limiter and compare level-matched audio. If the limiter is working hard, revisit the upstream compression and clipping instead of treating the ceiling as the whole master.

## How to measure true peak without confusing it with LUFS

Reset the meter, play the complete programme from start to finish and record both Integrated LUFS and maximum true peak. The first number describes programme loudness; the second describes the highest estimated reconstructed crest.

![Browser audio meter showing Integrated LUFS, Estimated True Peak, loudness range and sample peak as separate results](https://storage.ghost.io/c/af/4b/af4b05d4-2e0b-4edc-8378-1e2a62fecc70/content/images/2026/08/lufs-meter-true-peak-real.webp)

Read Integrated LUFS and Estimated True Peak as separate checks. One cannot substitute for the other.

The [SoundForgePro browser LUFS meter](https://soundforgepro.com/lufs-meter/) keeps the audio on the device and reports Estimated True Peak alongside loudness and sample peak. It is useful for a quick local pre-check. If a broadcaster, client or certification process names a compliant meter, use that specified tool for final acceptance.

For the current Sound Forge interface and meter-reset route, use the [Sound Forge LUFS and true-peak guide](https://soundforgepro.com/sound-forge-loudness-meters/). If the loudness result itself needs a constant gain correction, the [Sound Forge normalization workflow](https://soundforgepro.com/how-to-normalize-audio-in-sound-forge-pro/) separates Peak, RMS and LUFS decisions.

## A five-step true-peak delivery check

### 1\. Read the written specification

Record the exact ceiling, unit, measurement standard, channel layout and file format. “Peak” is ambiguous unless the brief says sample peak or true peak.

### 2\. Meter the complete programme

Reset the measurement, play the full programme and save the maximum dBTP result. A short preview can miss the loudest transient.

### 3\. Control the peak deliberately

If correction is needed, reduce gain or use a limiter in verified true-peak mode. Don’t pile on heavy limiting just to make a warning disappear.

### 4\. Encode the delivery file

Create the actual AAC, MP3, video mux or other required deliverable with the specified sample rate and bitrate.

### 5\. Reopen, remeasure and audition

Inspect the delivered file, not only the source session. Listen around the loudest transient and compare the encoded result with the lossless master.

![Five-step true-peak delivery check from reading the specification through remeasuring the encoded file](https://storage.ghost.io/c/af/4b/af4b05d4-2e0b-4edc-8378-1e2a62fecc70/content/images/2026/08/true-peak-delivery-check-mobile.webp)

A true-peak ceiling belongs inside a delivery workflow: specify, measure, control, encode and verify.

## Five mistakes that make true-peak advice unreliable

- **Calling dBTP a loudness target.** True peak limits the top of the waveform; LUFS describes programme loudness.
- **Calling every reconstructed overshoot audible clipping.** A positive estimate flags risk, while the playback path determines the actual outcome.
- **Using −1 dBTP as a universal upload rule.** It is a common starting point and a real value in specific standards, but scope matters.
- **Checking only the source WAV.** The codec or sample-rate conversion can create a different peak shape.
- **Assuming the limiter guarantees the deliverable.** Processing after the limiter and the final encode still need verification.

## True peak FAQ

### Can true peak be above 0 dBTP when no sample clips?

Yes. Every stored sample can remain below 0 dBFS while the reconstructed waveform rises above full scale between samples. A true-peak meter estimates that crest by oversampling and interpolation.

### What is the difference between dBTP and dBFS?

dBFS is the full-scale reference commonly used for stored digital sample levels. dBTP uses the same full-scale reference for a true-peak measurement that accounts for between-sample reconstruction.

### Is −1 dBTP the correct ceiling for every platform?

No. −1 dBTP is a common starting point and an EBU limit for generic linear PCM production, while other delivery systems or platform guidance can specify a different ceiling. Follow the written destination requirement.

### Does true peak affect LUFS?

They describe different properties. Changing gain or limiting can affect both results, but a true-peak number does not tell you the programme's Integrated LUFS, and a LUFS result does not reveal its maximum reconstructed peak.

### Does a true-peak limiter guarantee that AAC or MP3 will not clip?

No. It reduces risk at the limiter output, but later sample-rate conversion and encoding can change peak shape. Encode the required format, reopen it and measure the deliverable.

### How do I measure true peak correctly?

Use a true-peak meter, reset it, play the full programme and record the maximum dBTP value. For formal delivery, use the standard, meter and mode named by the specification; then repeat the check on the encoded file.

*Last fact-checked September 5, 2026 against ITU-R BS.1770-5, EBU Tech 3343-2023, Spotify for Artists and Apple Digital Masters.*